Polaris RZR 800 2013 - Lower Steering Shaft Removal (Eps Models)

5
5.31
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
3. Remove the pinch bolt retaining the lower steering
shaft to the power steering unit.
4. While supporting the power steering unit, remove the
(4) nuts from the mount bracket.
5. Carefully remove the power steering unit and mount
bracket from the vehicle as an assembly.
6. If replacing the power steering unit, remove the (4)
bolts that retain the power steering unit to the mount
bracket.
WARNING
Electronic Power Steering (EPS) units are programmed
to be vehicle specific and are not interchangeable
between product lines.
Lower Steering Shaft Removal (EPS
Models)
1. Use the steering wheel to position the front wheels
so they point straight ahead.
2. Locate the lower steering shaft through the left front
wheel well. Mark the lower steering shaft, gear box
stub shaft and gear box to aid installation.
3. Remove the power steering unit (see “Power
Steering Unit Removal” procedure).
BODY / STEERING / SUSPENSION