7
7.61
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
6. With the roll pin removed, slide the cross pin out and
remove the remaining differential gears.
7. Inspect the gears, thrust washers and differential
case for excessive wear or damage. Replace
components if needed.
Differential Assembly
1. Thoroughly clean the differential components prior to
reassembly.
2. Install the lower differential gear and thrust washer.
3. Install the side differential gears and thrust washers
and slide the cross pin into position with the hole side
facing the hole in the differential case.
4. Install a new roll pin.
FINAL DRIVE
To Next Page
Loading...
