7.34
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
2. Install the fasteners that attach the rear bearing
carrier to the upper and lower A-arms. Torque bolts
to specification.
Upper Rear Bearing Carrier Bolts:
RZR: 33 ft-lbs (45 Nm)
RZR S / RZR 4: 40 ft-lbs (54 Nm)
Lower Rear Bearing Carrier Bolts:
RZR: 38 ft-lbs (52 Nm)
RZR S / RZR 4: 40 ft-lbs (54 Nm)
3. Apply grease to drive shaft axle splines.
4. Install rear wheel hub assembly, cone washers, and
hand tighten the castle nut. Install washers with
domed side out.
5. Install brake caliper mounting bolts and torque to 18
ft-lbs (24 Nm).
Rear Caliper Mounting Bolts:
18 ft-lbs (24 Nm)
CAUTION
New bolts have a pre-applied locking agent which is
destroyed upon removal. Always use new brake caliper
mounting bolts upon assembly.
FINAL DRIVE
To Next Page
Loading...
