7
7.49
9924707 - 2013–2014 RZR 800 Service Manual
© Copyright 2013 Polaris Sales Inc.
2. Install new seals on each side of gearcase housing
using a standard seal installer. Apply a thin coat of
case sealant (2871557) to gearcase mating surfaces
upon cover installation.
3. If removed, install each axle spool bearing race
using standard bearing installation tools and an arbor
press.
WARNING
Wear the appropriate safety equipment while installing
bearing races to
reduce the risk of injury.
FINAL DRIVE
To Next Page
Loading...
