PoolCop Evolution - Page 101

P o o l C o p M a n u a l : V 4 2 EN P a g e | 101
www.poolcop.com PCFR
5.6.6.1.3 Close setting (Aux15 settings)
When pool cover function is
installed, Aux15 (close
command) is preconfigured in
pulse mode with 2 minutes
pulse duration. These settings
can be changed from this
view. Duration should be long
enough to allow full cover
operation from open to close.
AU X15 : R srv'd C over
Mode
: Pulse
ON
: 00:00
Duration
: 00:02:00
S E L E C T
QUIT
5.6.6.1.4 Position setting (In10 settings)
When pool cover function is
installed, In(10) is
preconfigured for pool cover
‘closed’ position sensing. The
settings can be changed from
this view, in particular, one can
decide to get an alert (or not)
when cover is not detected
closed.
IN P U T S 10
Pool Cover
Action when
: Closed
Alert
: NO
S E L E C T
QUIT