Procentec ComBricks - Page 71

ComBricks User Manual v6.4.0 | January 18| © PROCENTEC 71/219
After clicking on the 'Connect ComBricks' button, a mid-screen dialogue window is displayed which is used to
setup the connection with ComBricks (see Fig. 49).
2.Connect to a
COMbricks unit
1. Start this
shortcut from the
Start Menu
Available
connections
Start connection
Start discovery tool
Important parameters!
(network, user and
password)
Fig. 48 - Starting ProfiTrace 2 for ComBricks
Fig. 49 - Setting up the connection