Operator’s Manual LTV
®
Series ventilator Page 10-17
p/n 10664, Rev. Y
Set Date
Use the Set Date option to view or set the current date stored in the ventilator.
To view the Date:
1) Push the Select button while SET DATE is displayed.
2) The current date is displayed in the currently selected date format.
3) Push the Control Lock button to exit.
To modify the Date:
1) Push the Select button while SET DATE is displayed.
2) The current date is displayed in the currently selected date format (MM/DD/YYYY, DD/MM/YYYY,
or YYYY/MM/DD).
3) Push the Select button, YEAR xxxx is displayed.
4) Turn the Set Value knob until the desired year is displayed.
5) Push the Select button, MONTH xx is displayed.
6) Turn the Set Value knob until the desired month is displayed.
7) Push the Select button, DAY xx is displayed.
8) Turn the Set Value knob until the desired day is displayed.
9) Push the Select button to accept the new date.
Range: 1/1/1998 - 12/31/2097
To Next Page
Loading...
