Operator’s Manual LTV
®
Series ventilator Page 6-5
p/n 10664, Rev. Y
Inspiratory / Expiratory Hold
Pushing the Insp/Exp (Inspiratory/Expiratory) Hold control button causes the ventilator to toggle
between the following messages in the display window. Each push causes the next item in sequence
to be displayed:
INSP HOLD
EXP HOLD
Normal monitor display
While INSP HOLD or EXP HOLD is displayed:
• The Insp/Exp Hold control button LED will flash on and off.
• If the Insp/Exp Hold control button is not pushed within 60 seconds, the message will be
removed and the LED will turn off.
• Pushing the Select, Silence / Reset or Control button will return the display to normal and the
LED will stop flashing.
To Next Page
Loading...
