Pulmonetic Systems LTV 950 - Volume; Pressure Mode (LTV 1000 & 950 Only)

Page 6-32 LTV
®
Series ventilator Operator’s Manual
p/n 10664, Rev. Y
Volume / Pressure Mode (LTV® 1000 & 950 Only)
Use this button to toggle between Pressure Control and Volume Control modes of ventilation.
To toggle between the modes:
1) Push the mode button once
. The associated LED will flash for 5 seconds.
2) To confirm the mode change, push the mode button again while the LED is flashing.
The ventilator will begin operating in the new mode as soon as the mode change is complete.