Operator’s Manual LTV
®
Series ventilator Page 6-29
p/n 10664, Rev. Y
Set Value Knob
Use the Set Value Knob to establish control values and navigate extended features menus.
Variable Controls:
To change the setting for a variable control:
1) Push the button for the control to be modified.
2) Turn the Set Value knob clockwise to increase the value, or
3) Turn the Set Value knob counter-clockwise to decrease the value.
To change the setting by small increments, turn the knob slowly. To change the setting by larger
increments, turn the knob more quickly.
Extended Features:
To navigate through a list of items in an Extended Features menu:
1) Turn the Set Value knob clockwise to display the next menu item, or
2) Turn the Set Value knob counter-clockwise to display the previous menu item.
To Next Page
Loading...
