Page 11-12 LTV
®
Series ventilator Operator’s Manual
p/n 10664, Rev. Y
Exit
To exit the vent check mode and return to normal ventilation mode at any point proceed as follows:
Enter normal ventilation mode:
1) Turn the Set Value Knob to scroll through the main menu entries (VENT OPS, ALARM OPS,
VENT CHECK, etc.) until EXIT is displayed.
2) Push the Select button while EXIT is displayed.
3) Alternatively, push the Control Lock button until normal ventilation mode is restored.
POST will be performed and the ventilator will begin ventilation using the previously stored settings.
To Next Page
Loading...
