RadioLink Electronic Limited
www.radiolink.com
Gain2: a group gyro gains, can switching from Gain1 and Gain2
Gain4: two groups gyro gains, 2 gains can be set in one group, can switching from Gain1 and
Gain2, Gain3 and Gain4.
Gain mode: Normal and AVSC mode can be selected. The AVCS mode increases straight
running stability more than that of the Normal mode. The initial mode is AVSC (the value is 0%),
-120% to 120% can be selected, -120% to -1% indicate Normal mode and 0% to 120% indicate
AVSC mode.
＊
AVCS: Angular Vector Control System
Gyro mixing 2/2
Click 1/2 at the top right corner to switch the setting menu from built-in gyroscope setting
menu to the 2/2 external gyroscope setting menu.
Current gain: Group1 and Group2 can be selected,
Group1 including Gain1 and Gain2, Group2 including Gain3
and Gain4.
Gain switch: DT1/DT2/DT3/DT4/DL1 can be set to adjust
the gyro sensitivity, if the Gain switch select as “NULL”, it means the gyro sensitivity only can be
adjust by clicking the “+” and “-“ in Gyro mixing 1/2 menu.
Gain group type switch: if the Gyro group type selected Gain4, a switch should be set to
switching between Group1 and Group2. PS1/PS2/PS3/PS4/PS5/Steering/Trigger can be selected.
If the Gain group type switch selects “NULL”, then only one group of gyro gain can be selected
at a time.
To Next Page
Loading...
