RadioLink RC8X User Manual

RadioLink Electronic Limited
www.radiolink.com
130
the character of the model name you want to set or change, click “Confirm” at the bottom of
the screen to save the setting.
Attention: when you click “Paste model”, a question “Copy data error. Please copy again!”
means you have copy data, you have to copy data from another model and then paste to the
model you need. Copy model and paste model will not succeed for one model.
Reset: all the models’ data can be reset to the factory setting. For example, if you want to
reset the memory of model_1, you need to click the button “model_1”, click “Reset”, click
“Confirm” when the question “Are you sure to reset the model? model_1” have pop out.
Delete model: Select the model to be deleted. Click Delete Model, and then confirm to
delete the model.

RadioLink RC8X Specifications

General

Channels	8
Frequency	2.4GHz
Modulation	FHSS
Telemetry	Yes
Spreading Spectrum	DSSS
Antenna Type	Dual Antenna
Output Signal	PWM, PPM, SBUS
Low Voltage Alert	Yes
Simulator	Yes
Battery Type	LiPo
Voice Alerts	Yes
Display	3.5 inch color screen, 320*480 resolution
Frequency Band	2.4GHz
Operating Voltage	3.5-4.2V
Channel Resolution	4096
Model Type	Helicopter, Airplane, Glider, Multirotor
Compatible Receivers	R8EF, R6FG, R4FGM, R4F
Battery	3.7V 3000mAh LiPo