RadioLink Electronic Limited
www.radiolink.com
ABS(return brake1/2/3), ABS(delay brake1/2/3), ABS(cycle brake1/2/3), traction
control(return/delay/cycle), brake1/2/3 rate, brake EXP(brake1/2/3), brake delay(brake1/2/3), tilt
mixing(RUD to FLP), tilt mixing(FLP to RUD), idle up, programable mixing1/2/3/4/5/6/7/8 A/B,
4WS front rate, 4WS rear rate, dual ESC, dual ESC ratio, gyro gain, Ackermann, condition.
“NULL”: indicate that the function is not enabled.
Setting steps: turn on the RC8X, into home page, click the button at the left bottom of
RC8X into System menu, click into Tools menu, click the blue select box named Trim/Dial
select to assign functions for the transmitter’s digital trimmer button DT1, DT2, DT3, DT4, and
dial button DL1.
Back: click the button or short press the power button to return to the previous menu.
To Next Page
Loading...
