REXROTH EFC 3600 - Group E2: Multi-Speed and Simple PLC; Acceleration;Deceleration Time 2, 3 and 4; Multi-Speed Frequency

8.8 Group E2: Multi-speed and Simple PLC
8.8.1 Acceleration/deceleration time 2, 3 and 4
E2.00 Acceleration time 2
Setting range 0.1 ~ 6,000.0s
Minimum unit 0.1s
Factory default 5.0s
E2.01 Deceleration time 2
See E2.00 "Acceleration time 2"
E2.02 Acceleration time 3
See E2.00 "Acceleration time 2"
E2.03 Deceleration time 3
See E2.00 "Acceleration time 2"
E2.04 Acceleration time 4
See E2.00 "Acceleration time 2"
E2.05 Deceleration time 4
See E2.00 "Acceleration time 2"
E2.06 ~ E2.09
8.8.2 Multi-speed Frequency
E2.10 Multi-speed frequency 1
Setting range 0.00 Hz ~ [b1.06]
Minimum unit 0.01 Hz
Factory default 0.00 Hz
E2.11 Multi-speed frequency 2
See parameter E2.10 "Multi-speed frequency 1"
E2.12 Multi-speed frequency 3
See parameter E2.10 "Multi-speed frequency 1"
E2.13 Multi-speed frequency 4
See parameter E2.10 "Multi-speed frequency 1"
E2.14 Multi-speed frequency 5
See parameter E2.10 "Multi-speed frequency 1"
E2.15 Multi-speed frequency 6
See parameter E2.10 "Multi-speed frequency 1"
E2.16 Multi-speed frequency 7
Bosch Rexroth AG
Parameter Settings
EFC 3600
106/259
DOK-RCON03-EFC-3600***-IT03-EN-P