REXROTH EFC 3600 - Protection During Handling and Mounting

2.4.6 Protection During Handling and Mounting
Risk of injury by improper handling! Injury by crushing, shearing, cutting, hitting!
● Observe the relevant statutory regulations of accident prevention.
● Use suitable equipment for mounting and transport.
● Avoid jamming and crushing by appropriate measures.
● Always use suitable tools. Use special tools if specified.
● Use lifting equipment and tools in the correct manner.
● Use suitable protective equipment (hard hat, safety goggles, safety shoes,
safety gloves, for example).
● Do not stand under hanging loads.
● Immediately clean up any spilled liquids from the floor due to the risk of fall-
ing!
EFC 3600 Bosch Rexroth AG
Safety Instructions for Electric Drives and Controls
DOK-RCON03-EFC-3600***-IT03-EN-P
11/259