b1.16 Second frequency setting source
Setting range 0 ~ 6
Minimum unit 1
Factory default 2
● 0: Given by panel potentiometer
● 1: Given by panel digital setting
● 2: Given by external analog input voltage (AIV)
● 3: Given by external analog input current (AIC)
● 4: Set by external UP / DOWN terminals
● 5: Given by communication
● 6: Given by multi-speed
See descriptions for parameter b1.00.
b1.17 The second RUN command source
Setting range 0 ~ 2
Minimum unit 1
Factory default 0
b1.18 ~ b1.19: Reserved
● 0: Inputting commands by operating panel
● 1: Inputting commands by external terminals
● 2: Inputting commands by communication
8.2.2 Acceleration/deceleration Control
b1.20 Acceleration time 1
Setting range 0.1 ~ 6,000.0s
Minimum unit 0.1s
Factory default 5.0s
b1.21 Deceleration time 1
Setting range 0.1 ~ 6,000.0s
Minimum unit 0.1s
Factory default 5.0s
EFC 3600 Bosch Rexroth AG
Parameter Settings
DOK-RCON03-EFC-3600***-IT03-EN-P
59/259
To Next Page
Loading...
