● The technical data, connection and installation conditions of the components
are specified in the respective application documentations and must be fol-
lowed at all times.
National regulations which the user must take into account
● European countries: In accordance with European EN standards
● United States of America (USA):
– National Electrical Code (NEC)
– National Electrical Manufacturers Association (NEMA), as well as local engi-
neering regulations
– Regulations of the National Fire Protection Association (NFPA)
● Canada: Canadian Standards Association (CSA)
● Other countries:
– International Organization for Standardization (ISO)
– International Electrotechnical Commission (IEC)
2.3.3 Hazards by Improper Use
● High electrical voltage and high working current! Danger to life or serious in-
jury by electric shock!
● High electrical voltage by incorrect connection! Danger to life or injury by
electric shock!
● Dangerous movements! Danger to life, serious injury or property damage by
unintended motor movements!
● Health hazard for persons with heart pacemakers, metal implants and hearing
aids in proximity to electric drive systems!
● Risk of burns by hot housing surfaces!
● Risk of injury by improper handling! Injury by crushing, shearing, cutting, hit-
ting!
● Risk of injury by improper handling of batteries!
● Risk of injury by improper handling of pressurized lines!
2.4
Instructions with Regard to Specific Dangers
2.4.1 Protection Against Contact With Electrical Parts and Housings
This section concerns components of the electric drive and control
system with voltages higher than 50 volts.
Bosch Rexroth AG
Safety Instructions for Electric Drives and Controls
EFC 3600
6/259
DOK-RCON03-EFC-3600***-IT03-EN-P