Ricoh M160 - Page 349

Service Call
SM 6-105 M160/M161
Troubleshooting
SC No. Level Error Name/Error Condition/Major Cause/Solution
 Incorrect argument
 Incorrect internal parameter
 Insufficient working memory
 Abnormal performance caused by an error that cannot be
detected in normal SC detection due to hardware
specifications.
 Turn the main power switch off and on.
 Reinstall the software of the controller board.
 Reinstall the software of the engine board.
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC991-00 C
Software continuity error
The software has attempted to perform an unexpected
operation. (However, the process can continue running if
recovery processing is carried out.)
 Incorrect argument
 Incorrect internal parameter
 Insufficient working memory
 May have resulted from an error that cannot be detected by
the hardware using normal SC detection.
Not required
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC992-00 D
Undefined SC error
An error that is not controlled by the system occurred (the error
does not come under any other SC code).
A SC code used in the previous machine was applied
erroneously.
Turn the main power switch off and on.