Ricoh M160 - Page 417

Main SP Tables-1
M160/M161 3-4 SM Appendix
1101
[Flicker Control]
Sets the flicker control (0: Disable, 1: Enable).
1-101-001 Flicker Control E*
[0 or 1 / 0 / 1 /step]
0: Disabled
1: Enabled
1105
[PrintTargetTemp]
Adjusts the target fusing temperature for each paper type. "C" indicates the
center of the roller.
1-105-001 C: Plain1 E* [140 to 205 / 178 / 1deg/step]
1-105-003 C: Plain2 E* [140 to 205 / 183 / 1deg/step]
1-105-005 C: Thick1 E* [140 to 205 / 192 / 1deg/step]
1-105-007 C: Thick2 E* [140 to 230 / 191 / 1deg/step]
1-105-011 C: Thin E* [140 to 205 / 168 / 1deg/step]
1-105-013 C: Envelope E* [140 to 230 / 205 / 1deg/step]
1-105-015 C: Card E* [140 to 205 / 195 / 1deg/step]
1-105-017 C: Transparency E* [140 to 205 / 173 / 1deg/step]
1-105-019 C: Special E* [140 to 205 / 185 / 1deg/step]
1105 [CurlDecMode]
1-105-021 Mode Display E*
[0 or 1 / 0 / 1 /step]
Enables or disables the CurlDecMode
(0: Disabled, 1: Enabled)
1-105-022 PreprtRotTime E*
[500 to 60000 / 20000 / 500msec/step]
Sets the pre-print rotation time for
reducing curls.