Ricoh M160 - Page 434

Main SP Tables-2
SM Appendix 3-21 M160/M161
Appendices:
SP Mode Tables
2-930-004 Lower m cycle E*
[0 to 20 / 1 / 1/step]
Lower counter to set it aside from the
obtained result if toner remaining in the
developer detected.
2-930-005 HH:240 Upper E*
[0 to 70 / 25 / 1count/step]
Counter for judging the upper limit
when toner remaining in the developer
detected.
2-930-006 HH:240 Lower E*
[0 to 70 / 38 / 1count/step]
Counter for judging the lower limit when
toner remaining in the developer
detected.
2-930-007 MM:240 Upper E*
[0 to 70 / 18 / 1count/step]
Counter for judging the upper limit
when toner remaining in the developer
detected.
2-930-008 MM:240 Lower E*
[0 to 70 / 34 / 1count/step]
Counter for judging the lower limit when
toner remaining in the developer
detected.
2-930-009 LL:240 Upper E*
[0 to 70 / 18 / 1count/step]
Counter for judging the upper limit
when toner remaining in the developer
detected.
2-930-010 LL:240 Lower E*
[0 to 70 / 36 / 1count/step]
Counter for judging the lower limit when
toner remaining in the developer
detected.
2-930-011 HH:182 Upper E*
[0 to 70 / 38 / 1count/step]
Counter for judging the upper limit
when toner remaining in the developer
detected.