OPTION
Communication Switch 05 (SP No. 1-104-006)
No Function Comments
0-3
Remote mode switch number
00-09 (0-9:HEX)
Enter the number to switch between TEL/FAX
modes using the external phone.
Communication Switch 06 - Not used (Do not change the factory settings.)
Communication Switch 07 - Not used (Do not change the factory settings.)
Communication Switch 09 (SP No. 1-104-009)
No Function Comments
0-7
Minimum interval between
automatic dialing attempts
This value is the minimum time that the
machine waits before it dials the next
destination.
Communication Switch 0A (SP No. 1-104-011)
No Function Comments
0
Point of resumption of memory
transmission upon redialing
0: From the error page
1: From page 1
0: The transmission begins from the page
where transmission failed the previous time.
1: Transmission begins from the first page,
using normal memory transmission.
7 Not used Do not change this setting.
Communication Switch 0B (SP No. 1-104-012)
No Function Comments
0-3 Not used Do not change these settings.
4
Printout of the message when
acting as a Transfer Station
0: Disabled, 1: Enabled
When the machine is acting as a Transfer
Station, this bit determines whether the
machine prints the fax message coming in from
the Requesting Terminal.
5 Not used Do not change this setting.
To Next Page
Loading...
