Ricoh Pro C5200s Operating Instructions Troubleshooting: Tcru/Oru

Sheets are curled or wavy.
• Flatten curls and waviness before loading paper.
• Turn the sheets the other way up or smooth the edges before loading.
• Stacking too many sheets may cause the sheets on top to curl greatly. If this happens, reduce the
number of stacked sheets.
Sheets absorbed moisture and became limp.
Sheets that will not be used for a long time should be protected from moisture by, for example, storing
them in a sealed bag.
When using thick paper or slippery paper.
Enable the Pickup Assist setting.
<If custom paper is used>
1. In [Advanced Settings] for the custom paper in use, set [Pickup Assist] to [On].
<If custom paper is not used>
1. In the [Preprocessing: LCT] group on the [Adjustment Settings for Skilled Operators] menu, set
[Pickup Assist] to [On].
4. Troubleshooting Paper Delivery Problems
68

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes