23—MIDI and Synchronization
306 www.RolandUS.com Roland VS-2400CD Owner’s Manual
7. Set “SYNC MODE” to “INT.”
8. Press the VS-2400CD’s V-LINK button.
A dialog box will ask you for confirmation.
9. Press ENTER/YES.
V-LINK mode will be turned on, and V-LINK will light.
Now the Edirol DV-7PR can be operated from the VS-2400CD.
For details on the functions that you can control in V-LINK mode and how to operate
the VS-2400CD, refer to “V-LINK function chart.”
When operating the Edirol DV-7PR, the “Select a Clip Bank” operation listed in the
“V-LINK function chart” corresponds to switching the palette.
“SYNC MODE” can be switched by holding down SHIFT and pressing NUMERICS•EXT
SYNC. If “SYNC MODE” is set to “INT,” the EXT SYNC indicator will be lit.
VS2400OMUS.book 306 ページ ２００６年２月２８日 火曜日 午前１１時１２分
To Next Page
Loading...
