Ruijie RG-WLAN Series

Configuration Guide Configuring LLDP
5.4 Configuration
Configuration
Description and Command
Configuring the LLDP
Function
(Optional) It is used to enable or disable the LLDP function in global or interface
configuration mode.
lldp enable
Enables the LLDP function.
no lldp enable
Disables the LLDP function.
Configuring the LLDP Work
Mode
(Optional) It is used to configure the LLDP work mode.
lldp mode {rx | tx | txrx }
Configures the LLDP work mode.
no lldp mode
Shuts down the LLDP work mode.
Configuring the TLVs to Be
Advertised
(Optional) It is used to configure the TLVs to be advertised.
lldp tlv-enable
Configures the TLVs to be advertised.
no lldp tlv-enable
Cancels TLVs.
Configures the Management
Address to Be Advertised
(Optional) It is used to configure the management address to be advertised in LLDP
packets.
lldp management-address-tlv [ip-address]
Configures the management address to be
advertised in LLDP packets.
no lldp management-address-tlv
Cancels the management address.
Configuring the LLDP Fast
Transmission Count
(Optional) It is used to configure the number of LLDP packets that are fast transmitted.
lldp fast-count value
Configures the LLDP fast transmission count.
no lldp fast-count
Restores the default LLDP fast transmission
count.
Configuring the TTL
Multiplier and Transmission
Interval
(Optional) It is used to configure the TTL multiplier and transmission interval.
lldp hold-multiplier value
Configures the TTL multiplier.
no lldp hold-multiplier
Restores the default TTL multiplier.
lldp timer tx-interval seconds
Configures the transmission interval.
no lldp timer tx-interval
Restores the default transmission interval.
Configuring the Transmission
Delay
(Optional) It is used to configure the delay time for LLDP packet transmission.
lldp timer tx-delay seconds
Configures the transmission delay.
no lldp timer tx-delay
Restores the default transmission delay.
Configuring the Initialization
Delay
(Optional) It is used to configure the delay time for LLDP to initialize on any interface.
lldp timer reinit-delay seconds
Configures the initialization delay.