SAM4S SPS-300 Series Electronic Cash Register AU Operating Instructions • 93
To maximise the convenience and minimise the complexity, the recommend programming is:
In Service Mode:
1. Program an additional MACRO function key to keyboard. MACRO 1 ~ 4 have been
programmed on the default keyboard. Do this only if those 4 MACRO keys has been used for
some other features. Please see 6.KEY ASSIGNMENT for detail.
In Program Mode:
1. Program the “New Table” MACRO key with key sequence “TABLE Æ CHECK #” in
PGM-Mode. Please see MACRO (Program Mode Æ PAGE DOWN Æ 00) for detail.
2. Program CHECK# function keys with “Assigned by Register” sets to Yes in PGM-Mode.
Please see Function Keys for detail.
NOTE : There are more settings related to CHECK # and TABLE keys in printing on function key
themselves and in Print Option, please contact your dealer for detail.
To Next Page
