124 • Service Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
10. The display now shows USB PORT (SERIAL4) : ‘CASH’ Key RJ45 (SERIAL4) :
‘CLEAR’ Key.
For Australian standard model, Serial Port #4 is an USB port, unless modified. Please
have a look at the back panel inside the cover below Customer Display.
Press CASH if the COM Port #4 is a USB socket
Press CLEAR when COM Port #4 is an RJ45 Socket.
NOTE: Please check port arrangement prior to making the decision.
11. The RAM All Clear procedure is finished, then you will see “Please Wait ….” for the
following IRC Status test.
When IRC network is functioning, a “**
ETHERNET LINK SUCCESS!!! **”
will print.
Receipt Example:
** ETHERNET LINK SUCCESS!!! **
or…
When test result fails, an “**
ETHERNET LINK FAIL!!! **” will
print. This is when the register is either a
Standalone unit, or there is a problem on
the IRC network.
Receipt Example:
** ETHERNET LINK FAIL!!! **
NOTE: Please see Clerk Sign-On/Sign-Off for detail when CLOSED appears on the display
after IRC Status Test.
Please Wait ....
USB PORT(SERIAL4) : ‘CASH’ Key
RJ45 (SERIAL4) : ‘CLEAR’ Key
To Next Page
Loading...
