Sam4s SPS-300 - Page 172

160 • Program Mode Programming SAM4S SPS-300 Series Electronic Cash Register AU
Delete PLU Range
1. From the PLU PROGRAMMING screen, press 1 for to display the DELETE PLU
screen:
2. Press 1 to delete a range of PLUs. The PLU NUMBER screen displays:
3. Enter the first PLU in the range, you can:
• Enter the PLU number of the PLU (up to 14 digits) then follow with PLU function
key,
• Press a keyboard PLU key,
• Scan a Barcode as the PLU number,
• Press Modifier key followed by a keyboard PLU key,
4. Enter the first PLU in the range, you can:
• Enter the PLU number of the PLU (up to 14 digits) then follow with PLU function
key,
• Press a keyboard PLU key,
• Scan a Barcode as the PLU number,
• Press Modifier key followed by a keyboard PLU key,
The CONFIRM DELETE screen displays:
PLU NUMBER
* ENTER NUMBER OF
THE LAST PLU IN THE RANGE
AND PUSH PLU
5
Å
PLU NUMBER
* ENTER NUMBER OF
THE FIRST PLU IN THE RANGE
AND PUSH PLU
2
Å
DELETE PLU
0.DELETE ONE PLU
1.DELETE PLU RANGE