Sam4s SPS-300 - Page 295

SAM4S SPS-300 Series Electronic Cash Register AU Appendix • 283
Page Field Value Description
7 % AND TAX CALCULATION
0:ROUND UP AT 0.50
1:ROUND UP
2:ROUND DOWN
0
Select the digit that represents the appropriate rounding
method for tax and discount calculations: 0 for round up at
0.5 of a penny (0.005), 1 for always round up or 2 for always
round down.
SPLIT PRICE
CALCULATION
0:ROUND UP AT 0.50
1:ROUND UP
2:ROUND DOWN
0
Select the digit that represents the appropriate rounding
method for split pricing (i.e. 2 at 3 for $1.00) calculations: 0
for round up at 0.5 of a penny (0.005), 1 for always round up
or 2 for always round down.
8 COMPULSORY EAT-IN T-
OUT D-THRU BEFORE
TENDERING
Y or N Choose Y if you wish to enforce use of one of the destination
keys (EAT-IN, TAKE OUT, or DRIVE THRU) before the
sale is finalized.
HASH IS
Y:NORMAL N:NON-ADD
Y or N Y: Hash adds to all totals except the gross and net sales totals
on the financial report.
N: Hash does not add to any totals, except the HASH total on
the financial report.
ALLOW PRINT SCREEN ON
X/TIME KEY
Y or N Choose N if you wish to disable the print screen function of
the X/TIME key.
9 RESET Z COUNTER
AFTER Z1 REPORT
FINANCIAL REPORT
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z1 of each report listed.
TIME REPORT
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z1 of each report listed.
PLU REPORT
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z1 of each report listed.
CLERK REPORT
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z1 of each report listed.
GROUP REPORT
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z1 of each report listed.
10 RESET Z COUNTER
AFTER Z2 REPORT
DAILY SALES RPT
Y or N Choose Y or N to determine if you wish to reset the Z
counter after a Z2 of the daily sales report.
PRINTER PAPER SENSOR
ACTIVE
Y or N Choose Y or N to determine if activate the printer paper
sensor.
DEACTIVATE SPLIT
PRICING
Y or N If N, both multiplication and split pricing calculations can be
done with the X/TIME key. If Y, only multiplication can be
done with the X/TIME key.
11 ALLOW DIRECT
MULTPLICATION
Y or N If Y, you can multiply preset items by simply entering the
quantity, then pressing the preset PLU key.
INVENTORY CNT PGM
Y:ADD CURR. LVL
N:COUNTER REPLACE
CURR LEVEL
Y or N Choose Y or N to determine whether the quantity of
inventory you enter in the PLU stock program adds to
existing inventory quantity, or whether it replaces the current
inventory quantity.
GLOBAL ENTRY LIMIT
(0 - 14)
0
Enter a digit to determine the number of numeric digits that
can be entered for any register function. Enter 0 for no limit.