PLC-HP7000L Expand Serial Command Functional Specifications
18/94
7 Error Code Table
Error Code Contents
?
-When the received data cannot be decoded
-Parameter designation error (wrong digit number,
including invalid value, etc.)
000 Normal reception (This is “Not” error)
101 The function is not available in the selected Mode
102 Selected value is out of range (Not reflected)
103
Command mismatched to Hardware (the command
is for Optional function which is not implemented)
201
Incremented or decremented value or values are
beyond upper or lower limits.
301
Not executable due to screen capturing in process.
Prompting reissue of the command after a while.
402
Not executable due to PIN code in operation.
Prompting reissue of the command after a while.
Note) These error codes are applied to Expand Command, not to Basic Command
To Next Page
Loading...
Need help?
General
