Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
71/94
9.7.7 CR_SYSTEM Command
Command “CR_SYSTEM” [CR]
Details Get selected System
Acceptable “000_%1” [CR]
Input is
PC Analog
“VGA1” ------------------------- indicates VGA1 is selected
“VGA2” ------------------------- indicates VGA2 is selected
:
“XGA1” ------------------------- indicates XGA1 is selected
:
“WXGA3” ---------------------- indicates WXGA3 is selected
“1080P” ------------------------- indicates 1080p is selected
“1080I” ------------------------- indicates 1080i is selected
“1035I” ------------------------- indicates 1035i is selected
“720P” -------------------------- indicates 720p is selected
“575P” -------------------------- indicates 575p is selected
“480P” -------------------------- indicates 480p is selected
“575I” --------------------------- indicates 575i is selected
“480I” --------------------------- indicates 480i is selected
“1080PSF/24” --------------- indicates 1080psf/24 is selected
“1080PSF/25” --------------- indicates 1080psf/25 is selected
“1080PSF/30” --------------- indicates 1080psf/30 is selected
“MODE1” --------------------- indicates Mode1 is selected
:
“MODE10” ------------------- indicates Mode10 is selected
“ EXT11” ---------------------- indicates EXT11 is selected
:
“EXT60” ----------------------- indicates EXT60 is selected
* Error Code “101” [CR] is returned for no signal
Input is
PC-Digital/
AV-HDCP
“D-XGA1” ------------------- indicates D-XGA1 is selected
:
“D-WXGA3” ----------------- indicates D-WXGA3 is selected
“D-1080P” -------------------- indicates D-1080p is selected
“D-1080I” -------------------- indicates D-1080i is selected
“D-1035I” -------------------- indicates D-1035i is selected
“D-720P” --------------------- indicates D-720p is selected
“D-575P” --------------------- indicates D-575p is selected
“D-480P” --------------------- indicates D-480p is selected
“D-1080PSF/24” -------- indicates D-1080psf/24 is selected
“D-1080PSF/25” -------- indicates D-1080psf/25 is selected
“D-1080PSF/30” -------- indicates D-1080psf/30 is selected
* Error Code “101” [CR] is returned for no signal
Input is
Y,Pb/Cb,Pr/Cr
“AUTO” ------------------ indicates Auto is selected
“1080P” ------------------- indicates 1080p is selected
“1080I” ------------------- indicates 1080i is selected
“1035I” ------------------- indicates 1035i is selected
“720P” -------------------- indicates 720p is selected
“575P” -------------------- indicates 575p is selected
“480P” -------------------- indicates 480p is selected
“575I” --------------------- indicates 575i is selected
“480I” --------------------- indicates 480i is selected
* Selected System is returned, whether or not signal is
coming.
%1
Input is Video
or S-video
“AUTO” ------------------- indicates Auto is selected
“NTSC” ------------------- indicates NTSC is selected
“NTSC443” -------------- indicates NTSC4.43 is selected
“PAL” ---------------------- indicates PAL is selected
“SECAM” ----------------- indicates SECAM is selected
“PAL-M” ------------------- indicates PAL-M is selected
“PAL-N” ------------------- indicates PAL-N is selected
* Selected System is returned, whether or not signal is
coming.
Response
Unacceptable “Error Code” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English