Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
62/94
9.4.11 CR_COLTEMP Command
Command “CR_COLTEMP” [CR]
Details Get Color Temperature setting status
Acceptable “000_%1” [CR]
%1
“000” --------------------------------- Xlow
“001” --------------------------------- Low
“002” --------------------------------- Mid
“003” --------------------------------- High
“BLANK” ---- OSD Menu is blank
(Neither of Xlow / Low / Mid / High)
Response
Unacceptable “Error Code” [CR]
9.4.12 CR_OFFSET-R Command
Command “CR_OFFSET-R” [CR]
Details Get user controlled Red value of Offset
Acceptable “000_%1” [CR]
%1 “000 – 063”
Response
Unacceptable “Error Code” [CR]
9.4.13 CR_OFFSET-G Command
Command “CR_OFFSET-G” [CR]
Details Get user controlled Green value of Offset
Acceptable “000_%1” [CR]
%1 “000 – 063”
Response
Unacceptable “Error Code” [CR]
9.4.14 CR_OFFSET-B Command
Command “CR_OFFSET-B” [CR]
Details Get user controlled Blue value of Offset
Acceptable “000_%1” [CR]
%1 “000 – 063”
Response
Unacceptable “Error Code” [CR]
9.4.15 CR_NZRED Command
Command “CR_NZRED” [CR]
Details Get Noise Reduction setting status
Acceptable “000_%1” [CR]
%1
“OFF” ----------------------------- Cancel Noise Reduction
“ON” --------------------------------Set Noise Reduction
Response
Unacceptable “Error Code” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English