Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
69/94
9.7 Input Read Command
9.7.1 CR_INPUT Command
Command “CR_INPUT” [CR]
Details Get selected INPUT No.
Acceptable “000_%1” [CR]
%1 “1 – 4”
Response
Unacceptable “Error Code” [CR]
9.7.2 CR_SOURCE Command
Command “CR_SOURCE” [CR]
Details Get selected source
Acceptable “000_%1” [CR]
%1
“DIGITAL” --------------- RGB (PC Digital) is selected
“ANALOG” -------------- RGB (PC Analog) is selected
“SCART” ----------------- RGB (Scart) is selected
“HDCP” ------------------ RGB (AV HDCP) is selected
“HDMI” --------------------HDMI is selected
“VIDEO” ------------------ Video is selected
“S-VIDEO” --------------- S-Video is selected
“YPBPR” ----------------- Y,Pb/Cb,Pr/Cr is selected
“NETWORK” ------------ Network is selected
Response
Unacceptable
“Error Code” [CR] --- When command is not available in the given
condition (such as being selected input)
“?” [CR] ---------------- When unknown command is received
9.7.3 CR_SRCINP1 Command
Command “CR_SRCINP1” [CR]
Details Get Source of INPUT1
Acceptable “000_%1” [CR]
%1
“DIGITAL” ---------------------- in PC Digital mode
“ANALOG” ---------------------- in PC Analog mode
“SCART” ------------------------ in Scart mode
“HDCP” ------------------------- in AV HDCP mode
“HDMI” --------------------------- in HDMI mode
Response
Unacceptable “Error Code” [CR]
9.7.4 CR_SRCINP2 Command
Command “CR_SRCINP2” [CR]
Details Get Source of INPUT2
Acceptable “000_%1” [CR]
%1
“VIDEO” --------------------- in Video mode
“YPBPR” -------------------- in Y,Pb/Cb,Pr/Cr mode
“ANALOG” ------------------ in RGB mode
Response
Unacceptable “Error Code” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English