Sanyo PLC-HP7000L - CR_PROJH Command; CR_HMLAMP Command

PLC-HP7000L Expand Serial Command Functional Specifications
78/94
9.9.6 CR_PROJH Command
Command “CR_PROJH” [CR]
Details Get total running time of Projector (in hours)
Acceptable “000_%1” [CR]
%1 “0000000 – 0099999”
Response
Unacceptable “Error Code” [CR]
9.9.7 CR_HMLAMP Command
Command “CR_HMLAMP” [CR]
Details Get total lamp number
Acceptable “000_%1” [CR]
%1 “001”
Response
Unacceptable “Error Code” [CR]