Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
43/94
8.9.10 CF_PIPMAININP Command
Command “CF_PIPMAININP_%1_%2” [CR]
%1
“1” -------------------- Select Input 1
“2” -------------------- Select Input 2
“3” -------------------- Select Input 3
%2
“DIGITAL” ---------------- Select DVI Input
“ANALOG” --------------- Select Analog Input
“VIDEO” ------------------- Select Composite Video Input
“S-VIDEO” ---------------- Select S-Video input
“YPBPR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“YCBCR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“SCART” ------------------ Select SCART Input
“HDCP” -------------------- Select HDCP Input
“HDMI” -------------------- Select HDMI Input
Details
Select input and source of Main picture of “Picture in Picture”.
(Valid only when in the normal Power ON status.)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.11 CF_PIPSUBINPU Command
Command “CF_PIPSUBINP_%1_%2” [CR]
%1
“1” -------------------- Select Input 1
“2” -------------------- Select Input 2
“3” -------------------- Select Input 3
%2
“DIGITAL” ---------------- Select DVI Input
“ANALOG” --------------- Select Analog Input
“VIDEO” ------------------- Select Composite Video Input
“S-VIDEO” ---------------- Select S-Video input
“YPBPR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“YCBCR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“SCART” ------------------ Select SCART Input
“HDCP” -------------------- Select HDCP Input
“HDMI” -------------------- Select HDMI Input
Details
Select input and source of Sub picture of “Picture in Picture”.
(Valid only when in the normal Power ON status.)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.12 CF_PIPSIZE Command
Command “CF_PIPSIZE_%1_%2” [CR]
%1
“1” -------------------- Set main picture size to 10%
“2” -------------------- Set main picture size to 20%
“3” -------------------- Set main picture size to 30%
“4” -------------------- Set main picture size to 40%
“5” -------------------- Set main picture size to 50%
“6” -------------------- Set main picture size to 60%
“7” -------------------- Set main picture size to 70%
“8” -------------------- Set main picture size to 80%
“9” -------------------- Set main picture size to 90%
“10” ------------------ Set main picture size to 100%
%2
“1” -------------------- Set sub picture size to 10%
“2” -------------------- Set sub picture size to 20%
“3” -------------------- Set sub picture size to 30%
“4” -------------------- Set sub picture size to 40%
“5” -------------------- Set sub picture size to 50%
Details Set display size of “Picture in Picture”.

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English