Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
83/94
%1, %2,
%3, %4
Left width data comes first, and then one space, after that right
width data is followed.
%1 = Left width
%2 = Right width
%3 = Top width
%4 = Bottom width
e.g.
“0100_0100_0100_0100”[CR]
→Left = width 100
Right = width 100
Top = width 100
Bottom = width 100
Unacceptable “Error Code” [CR]
9.10.18 CR_BLENDSTART Command
Command “CR_BLENDSTART” [CR]
Details Get all values set for Start in Edge blending
Acceptable “000_%1_%2_%3_%4” [CR]
%1, %2,
%3, %4
Left width data comes first, and then one space, after that right
width data is followed.
%1 = Left width
%2 = Right width
%3 = Top width
%4 = Bottom width
e.g.
“0100_0100_0100_0100”[CR]
→Left = width 100
Right = width 100
Top = width 100
Bottom = width 100
Response
Unacceptable “Error Code” [CR]
9.10.19 CR_BLENDBLK Command
Command “CR_BLENDBLK” [CR]
Details Get all values set for Black level in Edge blending
Acceptable “000_%1_%2_%3” [CR]
%1, %2,
%3
Data of red comes first, and then one space, after that data of
green is followed.
%1 = Red
%2 = Green
%3 = Blue
e.g.
“0100_0100_0100”[CR]
→Red = 100
Green = 100
Blue = 100
Response
Unacceptable “Error Code” [CR]
9.10.20 CR_BLENDTESTPAT Command
Command “CR_BLENDTESTPAT” [CR]
Details Get setting status of Test pattern of Edge blending

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English