Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
50/94
8.9.37 CF_CMFDEFAULT Command
Command “CF_CMFDEFAULT_%1” [CR]
%1 “RST” ---------------------- Reset the value of Target
Details
Return the value of Advanced color matching to Factory Default status
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.38 CF_CMMENUOFF Command
Command “CF_CMMENUOFF_%1” [CR]
%1
“SET” ---------------------- Temporarily hide Advanced color matching menu
“RST” ---------------------- Display Advanced color matching menu
Details
Set Menu off function of Advanced color matching.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.39 CF_CMMENU Command
Command “CF_CMMENU_%1” [CR]
%1
“ON” ---------------------- Display Advanced color matching menu
“OFF” --------------------- Set Advanced color matching menu undisplayed.
Details
Set Advanced color matching menu displayed or undisplayed.
(Available only in the normal Power ON status)
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.40 CF_ HDMI SETUP Command
Command “CF_ HDMI SETUP _%1”[CR]
%1
“NORMAL” -------------------------- Select Normal mode
“ENHANCED” ---------------------- Select Enhanced mode
Details
Select image mode of HDMI setup.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Acceptable “000”[CR]
Response
Unacceptable “Error Code”[CR]
8.9.41 CF_FILH Command
Command “CF_FILH_%1” [CR]
%1 “RST” ---------------------- Reset Filter used time
Details Reset used time for filter of projector
Acceptable “000” [CR]
Response
Unacceptable “Error Code” [CR]
8.9.42 CF_FILTIMER Command
Command “CF_FILTIMER_%1” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English