Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
79/94
9.10 Setting Status Read Command
9.10.1 CR_LANG Command
Command “CR_LANG” [CR]
Details Get selected language
Acceptable “000_%1” [CR]
%1
“ENG” -------------------------- English is selected
“DEU” -------------------------- German is selected
“FRA” -------------------------- French is selected
“ITA” --------------------------- Italian is selected
“ESP” -------------------------- Spanish is selected
“POR” -------------------------- Portuguese is selected
“NED” -------------------------- Dutch is selected
“SVE” -------------------------- Swedish is selected
“JPN” -------------------------- Japanese is selected
“CHI” -------------------------- Chinese is selected
“KOR” -------------------------- Korean is selected
“RUS” -------------------------- Russian is selected
Response
Unacceptable “Error Code” [CR]
9.10.2 CR_MENUSIZE Command
Command “CR_MENUSIZE” [CR]
Details Get setting status of Menu size
Acceptable “000_%1” [CR]
%1
“NORMAL” ------------------------ Normal is selected
“DOUBLE” ------------------------ Double is selected
Response
Unacceptable “Error Code” [CR]
9.10.3 CR_INPUTBUTTON Command
Command “CR_INPUTBUTTON” [CR]
Details Get setting status of Input button
Acceptable “000_%1” [CR]
%1
“MODE1” --------------------------- Input button mode is Mode1.
“MODE2” --------------------------- Input button mode is Mode2.
“MODE3” --------------------------- Input button mode is Mode3.
Response
Unacceptable “Error Code” [CR]
9.10.4 CR_DISP Command
Command “CR_DISP” [CR]
Details Get setting status of Display
Acceptable “000_%1” [CR]
%1
“ON” --------------------------- Display is ON
“CNTDWNOFF” ------------ Count down is OFF
“OFF” ------------------------- Display is OFF
Response
Unacceptable “Error Code” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English