Sanyo PLC-HP7000L Technical Specifications

PLC-HP7000L Expand Serial Command Functional Specifications
63/94
9.4.16 CR_PROGV Command
Command “CR_PROGV” [CR]
Details Get Progressive scan setting status
Acceptable “000_%1” [CR]
%1
“ON” ------------------------------ Set Progressive scan On
“FILM” ----------------------------- Select FILM mode
“OFF” ------------------------------ Set Progressive scan Off
Response
Unacceptable “Error Code” [CR]
9.4.17 CR_IMAGE Command
Command “CR_IMAGE” [CR]
Details Get image setting status
Acceptable “000_%1” [CR]
%1
“DYNAMIC” -------------------------------- Dynamic
“STAND” ------------------------------------ Standard
“REAL” ------------------------------------ Real
“NATURAL” -------------------------------- Natural
“CINEMA” ---------------------------------- Cinema
“CUSTOM1” ------------------------------- “Image1”
“CUSTOM2” ------------------------------- “Image2”
“CUSTOM3” ------------------------------- “Image3”
“CUSTOM4” ------------------------------- “Image4”
“CUSTOM5” ------------------------------- “Image5”
“CUSTOM6” ------------------------------- “Image6”
“CUSTOM7” ------------------------------- “Image7”
“CUSTOM8” ------------------------------- “Image8”
“CUSTOM9” ------------------------------- “Image9”
“CUSTOM10” ----------------------------- “Image10”
Response
Unacceptable
“Error Code” [CR] -------- When the command is invalid due to
condition such as Input source.
“?” [CR] ----------------------- When unknown command is received
9.4.18 CR_IMGGMD Command
Command “CR_IMGGMD” [CR]
Details Get setting status of Standard/Real/Cinema in Image Gamma
Acceptable “000_%1” [CR]
%1
“DYN” -------------------------------- Dynamic
“STD” -------------------------------- Standard
“REL” -------------------------------- Real
“NTR” -------------------------------- Natural
“CNM” ------------------------------- Cinema
Response
Unacceptable “Error Code” [CR]
9.4.19 CR_ADVCOL Command
Command “CR_ADVCOL” [CR]
Details Get setting status of Advanced color
Acceptable “000_%1” [CR]
%1
“AUTO” ------------- Operate Advanced color with Auto
“OFF” --------------- Set Advanced color OFF
Response
Unacceptable “?” [CR]

Sanyo PLC-HP7000L Specifications

General

Brand	Sanyo
Model	PLC-HP7000L
Category	Projector
Language	English