PLC-HP7000L Expand Serial Command Functional Specifications
84/94
Acceptable “000_%1” [CR]
%1
“ON” ---------------------- On is selected
“OFF” --------------------- Off is selected
Response
Unacceptable
“Error Code” [CR]
9.10.21 CR_COLORMATCHING Command
Command
“CR_COLORMATCHING” [CR]
Details Get setting status of Color matching
Acceptable “000_%1” [CR]
%1
“ON” ---------------------- On is selected
“OFF” --------------------- Off is selected
Response
Unacceptable
“Error Code” [CR]
9.10.22 CR_CMMSXY_%1 Command
Command
“CR_CMMSXY_%1” [CR]
Details Get “x”,”y” value of Measured of Color matching
Acceptable “000_%2_%3” [CR]
%1
“RED” ---------------------- value of Red is selected
“GREEN” ----------------- value of Green is selected
“BLUE” -------------------- value of Blue is selected
%2 “0000”-”1000”------------ “x” value of color of %1
%3 “0000”-”1000”------------ “y” value of color of %1
Response
Unacceptable
“Error Code” [CR]
9.10.23 CR_CMMSL_%1 Command
Command
“CR_CMMSL_%1” [CR]
Details Get “L” value of Measured of Color matching
Acceptable “000_%2” [CR]
%1
“RED” ---------------------- value of Red is selected
“GREEN” ----------------- value of Green is selected
“BLUE” -------------------- value of Blue is selected
%2 “0000”-”1000”------------ “L” value of color of %1
Response
Unacceptable
“Error Code” [CR]
9.10.24 CR_ CMTGXY_%1 Command
Command
“CR_CMMTGXY_%1” [CR]
Details Get “x””y” value of Target of Color matching
Acceptable “000_%2” [CR]
%1
“RED” ---------------------- value of Red is selected
“GREEN” ----------------- value of Green is selected
“BLUE” -------------------- value of Blue is selected
“WHITE” ------------------ value of White is selected
“CYAN” -------------------- value of Cyan is selected
“MAGENTA” ------------- value of Magenta is selected
“YELLOW” --------------- value of Yellow is selected
%2 “0000”-”1000”------------ “x” value of color of %1
Response
%3 “0000”-”1000”------------ “y” value of color of %1
To Next Page
Loading...
