Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-69
3.17 DOWNLOAD MODE (Cont’d)
List of items for downloading:
Yes: Available / No: Not available
Notes:
1. If the same name file is present when downloading, the file is overwritten.
2. When the items are selected and the target file doesn’t exist, the item cannot be selected.
3. “CONFIG”, size of “FONT/LOGO” varies depending on head density. Don’t download between the printers
having different head densities.
4. When downloading Kanji font, if NEC font and Ryobi font are saved in SD card, Ryobi font will be down-
loaded. When there are two type of Ryobi font; "JIS X 0208" support file and "JIS X 0213" support file, only
"JIS X 0208" is downloaded.
5. Download of "FONT/LOGO" created by tool ([Download font creation utility] or [Download logo file creation
tool]) is only available through Interface. You cannot download the data after copying to SD card. The files
uploaded to SD card cannot be loaded to the tool.
Item SD Card Interface Note
Firmware Yes Yes
Font Yes Yes
LCD data Yes Yes
Kanji outline font Yes Yes
Kanji font Yes Yes
Printer setting information
Yes No
SEMBL program
Yes No Uploaded files only
Font/Logo
Yes Yes Interface: Files created by [Download font
creation utility] or [Download logo file creation
tool] only.
SD card: Uploaded files only.
Receive buffer
No No
STATUS5 history
No No
All Yes No All items marked “Yes”
To Next Page
Loading...
