SATO HR2 Series - Page 121

Section 5: Troubleshooting
HR2 Series Operator Manual Page 5-5
5.1 ERROR SIGNAL TROUBLESHOOTING (Cont’d)
No. ERROR DISPLAY LED BUZZER ERROR CONDITION CORRECTIVE ACTION
22
HEAD LIFT ERROR STATUS:
Off
ERROR:
On
1 long
Beep
1) Head lift sensor
malfunctions.
2) Thermal head installation
error.
To clear error: Power Off
1) Replace head lift sensor.
2) Check thermal head installation
status.

+($'/,)7(5525