Section 3: Operation and Configuration
Page 3-32 HR2 Series Operator Manual
3.10 ADVANCED MODE (Cont’d)
ADVANCED MODE
Menu Description
The printer can be set to go into ONLINE mode automatically after feeding the
media automatically. Otherwise, the printer starts in the OFFLINE state.
YES: The printer goes online after feeding the paper automatically.
NO: The printer goes offline after feeding the paper automatically.
The initial value is YES.
Setting the auto online feed function.
This function enables the printer to feed paper automatically in online state
after starting up the printer.
YES: Feeding paper in online state after starting up the printer.
NO: Not feeding paper in online state after starting up the printer.
The initial setting is YES.
Note:
Online feed will not be performed when the printer type is set as Dispenser and
GAP sensor is selected.
Setting the online feed function.
This function enables the printer to feed paper automatically when recovering
from a head open error or when starting up the printer and changing to online
state.
YES: Feeding paper when changing to online state.
NO: Not feeding paper when changing to online state.
The initial setting is YES.
Note:
Online feed will not be performed when the printer type is set as Dispenser and
GAP sensor is selected.
Setting the display language on LCD.
The display languages are available in English or Japanese.
The initial value is ENGLISH.
The ESC sequence in SBPL commands can be defined as standard (using
non-printable code 1BH) or non-standard (some other user code).
The initial value is STANDARD.
To set non-standard code, send the user download command <LD> in Normal
Mode. For more details on the <LD> command, refer to the Command Specifi-
cations.
LCD backlight is turned off for power saving when the printer is not operated for
a specified period of time.
Set the time between 00 and 15 MIN.
This power saving function is disabled when it is 00 MIN, and the LCD back-
light will be on constantly.
The initial value is 00 MIN.
To Next Page
Loading...
