USER MANUAL (Instruction for Use) SW 6.1
Device Control and Operation
Version 6.1.6 dated 2020-01-31 EN Page 100 of 201
Fixation LED: On/Off switch for the patient fixation target. The patient's eye is
offered a blinking target to align on as a “rest position.”
Suction With the arrow- key the nozzle for particle aspiration or plume
evacuation system can be brought into position.
Enter Various warnings may be confirmed by this key.
WARNING!
Danger of exposure / injury!
The handling and operation of the AMARIS device and control features in any
other way as described in this User Manual may cause dangerous exposure!
6.7 Matrix Display
Between the two control panels on left and right side of the laser arm a matrix display shows
relevant information regarding:
Actual date, actual time
Microscope magnification
Surgery illumination level (displayed for 3 seconds if illumination is changed) when the
laser is in planning/ standby mode.
And information regarding:
Patients last name, treated eye
Eye position, microscope magnification
Treatment progress
Surgery illumination level (displayed for 3 seconds if illumination is changed) when the
laser is in treatment mode.
The value for the eye position (EyePos) gives information about how good the eye is centred. It
can reach value between 0 and 100 where 0 means that the position of the eye is out of hot zone
and 100 means that the eye is perfectly centred und the laser.
To Next Page
Loading...
