SCHWIND Amaris 500E - Mains Input Label of the Device; Laser Warning Labels; Figure 2-8: Mains Input Label AMARIS

USER MANUAL (Instruction for Use) SW 6.1
Safety
Version 6.1.6 dated 2020-01-31 EN Page 40 of 201
2.9.3 Mains Input Label of the Device
The mains input label of the manufacturer is placed near the mains input of the AMARIS,
providing information about power configuration of the device.
Mains Input set to:
100 V 110 V 120 V 127 V 208 V 220 V 230 V 240 V
Date:
Date:
Date:
Date:
Date:
1500301
Figure 2-7: Mains input label AMARIS
CAUTION
Internally changing the mains supply voltage to other values than the
recommended can cause malfunctions of the device.
2.9.4 Laser Warning Labels
The SCHWIND AMARIS excimer laser is marked with appropriate labels:
Laser Warning Labels
(alternatively as symbol)
Label is placed on front and back side of the
microscope lens.