USER MANUAL (Instruction for Use) SW 6.1
Device Control and Operation
Version 6.1.6 dated 2020-01-31 EN Page 92 of 201
6 DEVICE CONTROL AND OPERATION
This chapter describes the function of each excimer laser component.
6.1 General Operation Notes
IMPORTANT NOTE
The operation of the SCHWIND AMARIS excimer laser is only allowed by a
trained medical personnel.
Before operating the excimer laser, make yourself familiar with the safety
regulations (refer to chapter 2 Safety). This serves your personal security and
the protection of the product from damage.
IMPORTANT NOTE
Switching ON of the excimer laser and during laser operation, pay attention to
any errors and warnings which may be indicated on the computer screen.
Should you have any questions, please contact an authorized dealer of
SCHWIND eye-tech-solutions or the service department of SCHWIND eye-tech-
solutions. (Refer to chapter General Information – Service Hotline).
CAUTION
Damage of device!
Do not cover the louvers of the AMARIS system. This could cause overheating
of the device during operation.
Before activating any movements of the device make sure, there is no danger
of compressive or clamping, neither for patient nor for the user.
WARNING
Danger of explosion!
The excimer laser may not be operated in rooms where danger of explosions
exists and is not suitable for use in the presence of flammable mixtures.
Risk of injury!
Use the system only in a room with a compatible electrical supply.
Do not continue the treatment if there is any indication for incorrect processing
data or malfunction of the system in order to avoid possible injuries to the
patient!
To Next Page
Loading...
