SICK FLOWSIC100

74 FLOWSIC100 · Operating Instructions · 8012513/YSA5/V2-1/2016-07 · © SICK Engineering GmbH
Assembly and Installation
Subject to change without notice
 Follow the following instructions for installing the impact protector for type HAC.
Installing the impact protector option for type HAC
 Fold the impact protector plate around
the transducer and press the angled
clips into the recesses on the opposite
side of the plate.
 Keep folding the clips towards the folded
edge until they touch the plate.
 Align the impact protector facing the flow
direction and use a punch to drive the
crosswise recesses into the four
mounting holes of the transducer.
Punch