8 FLOWSIC100 · Operating Instructions · 8012513/YSA5/V2-1/2016-07 · © SICK Engineering GmbH
Important Information
Subject to change without notice
1.1 Intended use
Purpose of the device
The FLOWSIC100 measuring system is designed for no-contact measurement of the gas
flow rate and temperature or of the volume flow.
Correct use
Use the device only as described in these Operating Instructions. The manufacturer
bears no responsibility for any other use.
Carry out all measures required to maintain the device, e.g. maintenance and inspec-
tion, transport and storage.
Do not remove, add or modify any components to or on the device unless described and
specified in the official manufacturer information. Otherwise:
– The device could become dangerous.
– Any warranty by the manufacturer becomes void.
1.2 Responsibility of user
1.2.1 General information
Designated users
The FLOWSIC100 measuring system may only be operated by skilled technicians who,
based on their technical training and knowledge as well as knowledge of the relevant
regulations, can assess the tasks given and recognize the hazards involved.
Special local conditions
The relevant legal stipulations and associated technical regulations must be observed
when preparing and carrying out work on the respective system
All work must be carried out in accordance with the local, system-specific conditions
and with due consideration paid to the operating dangers and specifications.
Retention of documents
The Operating Instructions for the measuring system as well as system documentation
must be kept on site and be available for reference. Pass the respective documentation on
to any new owner of the measuring system.
To Next Page
Loading...
Need help?
General
