Chapter 7 Operating instructions
S3000
104 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009942/WK81/2012-11-28
Subject to change without notice
Application examples and
connection diagrams
7 Application examples and connection diagrams
The examples shown are only provided as an aid for your planning. You may need to
consider additional protection measures for your application.
In the examples with protective field switching, note that at the time of the switching there
may already be a person in the protective field. Only by means of switching in the correct
time frame (i.e. before the danger occurs at this point) is reliable protection provided (see
section 5.6 “Time for monitoring case switching” on page 86).
7.1 Stationary applications
7.1.1 Applications with one monitored area (S3000 Standard)
The area is permanently monitored by the S3000.
protection with S3000
Standard
S3000 Standard with one
protective field and warning field
— mounted horizontally
To Next Page
Loading...
