SICK S3000

Chapter 7 Operating instructions
S3000
110 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8009942/WK81/2012-11-28
Subject to change without notice
Application examples and
connection diagrams
7.4 Applications with sens:Control
W
ith sens:Control, the safe control solutions, SICK provides you with an entire range of
interface products that were specially developed for interfacing safety products and
machines.
For complex applications the S3000 can be integrated into sens:Control family safety
systems. In this way the functions of the safety laser scanner can be enhanced and
corresponding applications realized.
Please observe the related operating instructions for the sens:Control products.
7.4.1 More complex system expansions
Protection of two separate working areas with one S3000 Standard and a safety
controller.
7.4.2 Bus interfaces
All S3000 variants are equipped with EFI (safe SICK device communication). All safety-
relevant signals are transmitted using this interface. A bus connection to a safe fieldbus is
possible using the sens:Control device family.
Note
Fig.
74
:
S3000
with safety
controller
Fig.
75
:
S3000
bus interface
EFI
sens:Control device transmits
two independent OSSDs for
the two protective fields
 and 

